|
Bubba's sells Gooseneck and 5th Wheel Hitches from B & W:
Call (843) 821-7816 for your appointment !
The B&W Companion RV 5th Wheel
Hitch is available as an accessory to the B&W Turnover Ball
Gooseneck Hitch continuing the B&W tradition of 'a hitch when
you need it, a level bed when you don't.'
The Turnover Ball hitch is first
installed and then the Companion latches into the 2½ inch square
hole. Many RV hitches use mounting rails bolted into the truck
bed and when you remove the hitch the mounting rails are still
there. The Companion hitch was the first hitch on the market to
have all the mounting rails below the truck bed floor.
A unique feature of the B&W
Companion is its cam-action latching mechanism. The locking jaws
are a full 1 1/8" thick, providing a worry-free hook-up. The
head pivots from side-to-side (a full 7 degrees) to help prevent
binding, as well as from back-to-front. A single hydraulic shock
absorber helps to stabilize the side-to-side motion. The shock
also holds the head level for easier hook-up.
Vibration-dampening polyurethane bushings act as the base for
the front-to-back pivot of the unique saddle assembly of the
coupler. The Companion has 3 front-to-back and 3 up-and-down
adjustments for optimal turning clearance and weight
positioning. This hitch also works with any bed liner.
B&W plates the cam, the arms, and
the jaw assembly to prevent rusting. The rest of the hitch is
gray powder-coated to ensure a long-lasting finish.
Non-marring pads protect the bed
of your truck from direct metal-to-metal contact. The Companion
also boasts a sleek, yet rugged design to look like it belongs
in the bed of your truck, ready to work.
B&W's concept
of "A hitch when you need it, a level bed when
you don't" has been the basis for the B&W
Turnover Ball Gooseneck Hitch since 1988. The
patented Turnover Ball offers you the
versatility you need when you need it. We
offer a Turnover Ball Hitch to fit nearly
every domestic full-sized pickup on the
market.
The Turnover
Ball is an easily-installed, complete
gooseneck hitch that bolts to the frame of
your truck using existing holes. The Turnover
Ball comes with a removable 2 5/16" ball, and
is rated for 30,000 lbs. towing and 7,500 lbs.
tongue weight capacity. The ball stores upside
down in the socket when not in use, leaving a
flat, unobstructed bed floor.
To change, just
pull and turn the spring-loaded latch pin in
the driver's side wheel well, lift the ball
out of the socket, flip it over, drop it back
into the socket, and engage the latch pin. The
process takes longer to read about than it
does to complete.
They install in
about an hour, with no welding. The hitch
assembly simply bolts across the truck frame
under the bed while the bed is in place -- the
only modification to your truck is a four-inch
round hole in the pickup bed floor.
Several
accessories that supplement the Turnover Ball
system to meet your towing needs are also
available..
|
